Toyota Camry ›› 2011 ›› 2011 Toyota Camry Recalls

2011 Toyota Camry

Select another year: 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989

Recalls

Find the latest 2011 Toyota Camry recalls as issued by the National Highway Traffic Safety Administration (NHTSA) and Manufacturers.

Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
Component EQUIPMENT:OTHER:LABELS
Component SUSPENSION
Consequence A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Consequence A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
Mfg's Report Date NOV 13, 2014
Mfg's Report Date OCT 01, 2009
NHTSA CAMPAIGN ID 10V036000
NHTSA CAMPAIGN ID 14V732000
Notes OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Potential Number of Units Affected 153418
Potential Number of Units Affected 56
Remedy DEALERS WILL REPLACE THE LOAD CARRYING CAPACITY MODIFICATION (ADDENDUM) LABEL FREE OF CHARGE. THE RECALL EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-954-420-2000.
Remedy Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall is expected to begin on or around December 15, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Summary SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Summary Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.